Support +91-22-26335560
You are here : HomeHanatek

Advanced Friction Tester

The Hanatek Advanced Friction tester is the most comprehensive tool available for measuring the coefficient of friction of plastic film, printed cartons, packaging substrates or paper.
This flexible instrument can also be used to measure and display the frictional values of any flat surface including rubber, flooring plastics textile and leather.
In addition to providing static and dynamic slip values for a surface , the instrument allows the full friction force output to be displayed, stored and compared. This unique ability helps a manufacturer to relate the feeding and running speeds of a product to its surface characteristics.
The instrument is available with optional extras to measure peel strength of adhesives, tear strength of substrates and the blocking of plastic films and coated cartons.



Carton Force Analyser

The Hanatek Carton Force Analyser measures the forces that limit the running speed of folding box board packaging. By measuring the stiffness of the substrate and crease bending resistance the user can optimise cartons for faster running and packaging speeds. The instrument allows individual creases to be analysed identifying problem areas in packaging design or manufacture. Industry research indicates that the packaging speeds of pre-glued skillets is governed by the energy required to open creases. The CFA is the first instrument to isolate and accurately measure this key parameter.
The instrument measures: Crease folding force at 90°, Crease folding force at any angle up to 145° with a full graphical profile of the forces during test. Board stiffness at 15° or 7.5°, individual crease opening force and whole carton opening force.



Carton Force Analyser

The Hanatek Carton Force Analyser measures the forces that limit the running speed of folding box board packaging. By measuring the stiffness of the substrate and crease bending resistance the user can optimise cartons for faster running and packaging speeds. The instrument allows individual creases to be analysed identifying problem areas in packaging design or manufacture. Industry research indicates that the packaging speeds of pre-glued skillets is governed by the energy required to open creases. The CFA is the first instrument to isolate and accurately measure this key parameter.
The instrument measures: Crease folding force at 90°, Crease folding force at any angle up to 145° with a full graphical profile of the forces during test. Board stiffness at 15° or 7.5°, individual crease opening force and whole carton opening force.



Crease & Board Stiffness Tester

The CBT1 Crease & Board Stiffness Tester gives board manufacturers, printers and packing companies the ability to predict the 'runability' of a sample board or finished carton before committing valuable materials or machine time.
Board stiffness and crease recovery are key characteristics that affect the running performance of cartons on high speed packaging machines.
The instrument measures crease folding force at 90°, board stiffness at 15° and requires no external software for operation.



Carton Crease Proofer

The Hanatek Carton Crease Proofer (CCP) allows the user to produce production quality crease samples without committing valuable machine time.
The CCP comes complete with commercially produced rules and dies which are identical to those used on a full sized cut and crease machine.



Inclined Plane Friction Tester

The IPT is a low cost but accurate instrument for determining the static friction coefficient of flat surfaces.
The instrument performs the test and calculates the static COF, slip angle and statistics, completely eliminating the errors associated with manually operated instruments. Results can be output to the optional Hanatek results printer.
Used mainly in the packaging industry to measure the static slip of unprinted carton board, printed cartons, or plastic films and their coatings.



Film Shrink Tester

The film shrink tester is used to measure the effect of temperature on plastic films. The application of heat causes certain plastic films to rapidly contract; this effect can be used to seal and pack many items from food to consumer goods. The shrink effect is due to internal forces locked into the film during manufacture being released by heating. It is also known as linear thermal shrink or free shrink. The amount of shrinkage is dependent on the film type, thickness, and sealing temperature. Testing the percentage shrink of a film ensures that it is suitable for a particular packaging application and establishes the correct temperature for that application.



Melt Flow Indexer

Understanding melt flow is a key indicator for producers, processors and converters of plastic materials as it dictates the temperatures and pressures required to manufacture consistent quality products

The Hanatek MFI is one of the most advanced instruments available for the measurement the melt characteristics of thermoplastic polymers.
Actual barrel temperature can be measured to ensure that every test is performed with complete compliance to ASTM D1238 (2011) Part A, B or C and ISO 11133 (2011) with automatic calculation of test results
User interchangeable barrel core reduces service costs whilst the optional UKAS / ISO 17025 calibration kit provides user serviceability whilst maintaining certification.



Precision Thickness Gauge

The Hanatek FT3 Precision Thickness Gauge is specifically designed to quickly and accurately measure the thickness of a variety of substrates including film, paper, board, foil, tissue and textiles.
Operated via an intuitive touch screen interface the instrument will allow the user to define batch size, dwell time & measuring speed
Full test statistics can be easily viewed or printed to label for easy documentation control.
Contact pressure and contact area are factory set options dependent on the testing standard used, repeatability of better than 0.4 µm and resolution of 0.1 µm
For compliance to multiple standards, please enquire about the Hanatek Ft3-V Variable Force Thickness Gauge



Rub & Abrasion Tester

The Hanatek Rub and Abrasion tester brings new levels of repeatability and convenience to testing the durability of inks and coatings on any printed material.
The instrument is used for testing the ink/print, marking and rub resistance of cartons, films, labels and commercial printed material. The optional scratch test attachment is used for checking the cure and adhesion of UV inks and coatings whilst the optional wet rub test attachment checks for solvent resistance.